Welding Manipulator Column and Boom for Wind Tower / Windmill
We have marked a distinct and rich position in the market by
providing a high quality array of Welding Columns & Booms that
is widely used in various industries for the welding application.
Our provided product is manufactured with advanced technology and
top quality material in accordance with quality norms. The offered
Welding Columns & Booms are extremely desired by our patrons
for their high performance and long lasting nature. The welding
head is mounted at one end of the boom. The flux recovery system is
mounted at another end of the boom. It can provide automatic
welding including start/off, flux feeding & recoverying, wire
|Transverse stroke (mm)||1500||2000||3000||4000||5000||6000|
|Elevate stroke (mm)||1500||2000||3000||4000||5000||6000|
|Column rotate range||+/-180° By manual||+/-180°||+/-180°||+/-180°||+/-180°|
|Boom elevate speed||400mm/min||1000mm/min|
|Boom transverse speed||120-1200mm/min|
|Criss-Cross slide stroke||100*100mm by manual||100X100mm motorized|
The Column boom can work with rotator to achieve automatic welding
on vessels. the control can be combined in one remote box.
Motorised slide is equipped with this column and boom. Seam
tracking device can be mounted if needed.
- Motorized cross-slides facilitate the operator’s job of proper
weld torch placement. A laser pointer provides a guide ahead of the
- Can be fitted with a 2-axis electronic tactile probe enabling
automatic tracking of the joint in the horizontal (joint placement)
and/or the vertical axis (stickout regulation).
The assembly can be pivoted 90º for orientating the slides to make
longitudinal and circular welds. The boom may also be used for fine
corrective movements, via the joystick control. This unique feature
eliminates the offset distance from the torch to the boom
centerline thus allowing to reach inside smaller diameters.
Our Column and booms have a modular construction. Depending on the
employed welding process. used material and the geometry of
manufactured products. every column and boom can be modularly
tailored to best suit the task at hand. In addistion to the
dimensios, e.g. the welding equipment, criss-cross slide, welding
head mounting, flux feeding & recoverying for SAW, wire reel
size and position, seam tracking system, etc. are selected to
optimise the device for maximum productivity. Characteristics in
both rotation and travel on rails, also their massive grames ensure
safety at all times.
- A pneumatic flux recuperator (venturi type) that mounts directly
on to the hopper recycles the un-fused flux and separates out the
undesired fine particles.
- A pressurized flux tank can be used for a continuous supply of
new flux to the hopper.
- An automatic flux valve with pneumatic cylinder that opens/closes
with the welding cycle feeds flux from the hopper to the weld
Wire Reel Coils:
- Standard 25 Kg coils for easy handling.
- Large 100 Kg coil for fewer wire changes.
- The powerful wire feed heads have no problem pulling the wire
through the length of the wire liners.